The kitchen hood is used to extract all the fumes and odors that are released during cooking on the stove. And it needs to be cleaned from time to time, just like any other appliance, including your filter.
In this article we will discover how to clean the hood, from the outside to the inside, and its filter.
The frequency of cleaning the hood.
The frequency of cleaning depends on how much you use the stove. For example, if you usually eat out, we might even clean it every couple of months. Usually, though, it would be appropriate to clean it once a week, while the inside once a month.
The outside of the hood
The outside of the hood is definitely the easiest to clean because it is more exposed and accessible. Therefore, if the soft top is covered with metal, we can use plain Marseille soap or dishwashing liquid. Remember perhaps to dust the surface first to remove excess dust and particles, and then move on to the cleaning itself. It’s simple, and you only need to use a basin with water and detergent with which to rinse the microfiber cloth that we are going to use on the hood.
If the hood is lined with wood, make sure to use careful and specific products with the material, because wood is undoubtedly one of the most valuable surfaces. Harsh products would eventually scratch it, strip away the paint, or stain it permanently.
Whatever material the hood is covered with, remember to dry it with a clean, dry microfiber cloth as soon as the cleaning job is finished.
Clean the hood grilles
The grilles, which are located inside the hood, have the function of protecting the filters. If the grates aren’t very dirty, simply wipe them once a week with a microfiber cloth dampened with water and baking soda or water and vinegar to remove odors.
If they are dirty, they must be disassembled and soaked in a solution of hot water and vinegar and left on for about 20 minutes. The grease will melt and can be easily removed with the help of a sponge. Finally rinse and dry with a clean cloth.
How to clean the inside and filters of the hood
The hood filter, as you may have guessed by now, is located inside the hood.
The filters should be disassembled and sprayed with a solution based on water, vinegar and baking soda on the inner walls, a solution should be left on for a few minutes. Then, with the help of a sponge, we are going to remove the dirt and rinse with a cloth soaked in warm water.
Filters should be cleaned at least once a month. Stainless steel or aluminum filters can be soaked for a couple of hours in a solution of water and baking soda. Activated carbon filters can go into the dishwasher at 70° without detergent.