Mold is a common problem in the home. This develops in damp areas of the kitchen and bathroom, such as tile joints. Dangerous to health, these blackish traces should be removed as soon as the first signs appear. Discover a simple and natural trick to get rid of it.
Bathroom tile joints are particularly susceptible to mold. The latter also accumulate on the walls and around toilets. Cleaning this essential part is therefore essential to ensure a healthy and clean living environment. There are many methods for this purpose, but one of them proves to be particularly effective in the event of a major mold attack.
Traces of mold around the tiles are not aesthetic. To eliminate them in depth, you can opt for a natural pharmaceutical solution.
- Hydrogen peroxide, a radical solution for mould in tile joints
Hydrogen peroxide. Source: SPM
When tile joints become impregnated with mold, hydrogen peroxide or hydrogen peroxide can be effective and simple to use. In fact, its antifungal and antibacterial properties offer a radical solution against stubborn stains on joints. Simply apply it generously with a sprayer. Therefore, let the product act on the areas affected by mold. After about twenty minutes, scrub the joints with a sponge or an old toothbrush and wait an hour. Once the hydrogen peroxide odor is gone, wipe the critical surface with a clean, dry cloth. It should be noted that hydrogen peroxide can lose its effectiveness in light. It should then be stored in dark bottles or dark places for future use.
Other tips for cleaning tile joints naturally
Hydrogen peroxide isn’t the only solution for dirty tile joints. Other natural remedies can be adopted to remove grout stains and tile walls in the bathroom. For guaranteed effectiveness, this room should be cleaned and ventilated regularly.
- Borax, the anti-mould solution for clean and healthy tile joints
One of the effective products against mold is borax. Like hydrogen peroxide, this solution is capable of eliminating mould from the joints by giving them whiteness and shine. Mix one cup of borax powder with 3.5 liters of water. Using a brush soaked in this solution, scrub the entire surface of the black seals. When you’re done, wipe with a clean, damp cloth. The alkaline pH level of this product suppresses mold and prevents mold from forming in the joints. Borax can also irritate the skin, so gloves should be worn before each use.
- Baking soda and elbow grease, a powerful duo against mold in tile joints
Borax can be replaced with baking soda. This white powder acts in the same way against mold in joints. To do this, simply add a teaspoon of baking soda to a spray bottle (500 ml) filled with warm water. Then, spray the solution onto the tile joints and let it sit for up to an hour. The stain remover will thus be embedded inside the joints to eradicate mold and dirt in depth. Another trick is to use baking soda paste. To do this, simply mix baking soda with a little water to get a thick paste. After having applied it to the joints with the help of a brush. Rub the area with a sponge and then rinse!
- White vinegar, a remedy against mold in tile joints
White vinegar. Source: SPM
Finally, vinegar can also be an excellent solution against mold on tiles. It can help you keep your tiles in pristine condition after every cleaning. It will also be very effective on small incipient spots of mold. Simply pour the solution into a spray bottle and then spray the affected area. Let sit for a few minutes and then, using a soft brush or sponge, scrub the joints before rinsing. You can also use tea tree oil in the same way as vinegar. Thanks to its antifungal and antibacterial properties, it will guarantee you the same results.