Dirty and yellowish toilet? With this new method you will be able to forget about all this. Here’s what you need to make your toilet look like new in just a few minutes.

The bathroom is the room in the house that requires the most attention in cleaning. Bacteria and dirt are always present and must be combated. The proliferation of bacteria also affects the soap residue and the humidity present in the rest of the bathroom. That’s why cleanliness is really essential and should never be underestimated.

Even the toilet specifically needs a deep cleaning. Limescale, dirt and urine residue can cause bad odors that are very annoying. Therefore, we are going to see how to have a clean toilet by removing dirt and limescale without using chemicals available on the market.

In fact, we are going to create a mixture that can help you and is very effective. Below, we’ll look at what you’ll need, but remember to get some rubber gloves to protect your hands from bacteria and the products we’ll be using. So, let’s look in detail at how to clean the toilet.

Cleaning the toilet with this method: it’s very simple

To clean the toilet with this method, you will only need three products. The first is a long-handled brush, then 70% acetic acid, and finally some dish soap. The union of the two products allows you to eliminate bad odors and solve the problem.

Acetic acid has a very unpleasant smell, so be careful. This is usually referred to as acetate and is an organic chemical compound. It is used in the food industry as a preservative additive against fungi and bacteria. It is easily found on the market in supplied stores or online.

Dish soap, on the other hand, is often used to clean the toilet precisely because it removes bad odors. But not only because it also has a descaling and degreasing action in order to completely remove dirt. But let’s see in what dose to use these two products to clean the toilet.

To make this mixture, take a container and pour the entire bottle of acetic acid, about 1 L, and the dish soap into it. You will need about 15 tablespoons of the latter. Mix the two products well, also helping yourself with the long-handled brush.

At this point the mixture is ready and you can go to the bathroom to use it. However, before using the mixture you have composed, pour a bucket of water. Now it’s time to brush the mixture with the brush, rubbing well where the dirt in your toilet concentrates. Then add the rest of the mixture.

Let the mixture act for about an hour and then with the help of the brush go on to clean and remove the last traces of dirt. Over time you will be able to flush it and you will see that your toilet will be free of dirt, limescale and above all bad odors. You just have to try this method yourself.