With time and wear and tear, your iron runs the risk of being damaged and especially burned. This can make it very difficult to iron your clothes. Fortunately, there are a few cleaning methods to give it a second wind without damaging it further. Of course, you also have to take into account the material of the sole. Whether it’s Teflon, ceramic or steel, we are going to present you with effective home remedies to clean your iron.

Even if you perform regular maintenance of the iron, it is often difficult to avoid burns. To remedy the situation, specific cleaning will be necessary. Depending on its metal composition, you can use various natural methods to remove dirt and those unsightly traces. Here are a few!

Ceramic plates seem to be more durable, but sometimes they also burn. When you want to clean them to remove burn marks and annoying dirt, you have to be especially careful not to damage them. To do this, there is nothing better than using non-aggressive natural ingredients, such as baking soda, for example. As you surely know, this white powder has excellent properties for peeling, bleaching and deodorizing various elements of the home. It is therefore a very reliable and safe home remedy for this type of cleaning.

How to proceed ? Here are the instructions to follow:

1. Dissolve a few tablespoons of baking soda in water. 2. Then heat the iron before disconnecting it from the power source. 3. Wait for it to cool slightly before carefully applying the baking soda paste. 4. Leave it on for at least 5 minutes. 5. Then use a paper towel to wipe away all the dirt and residue from the product.

And now, in a few minutes, your iron just has a new look!

The Teflon coating on the sole is by far the most resistant cleaning material. Because it is very fragile and scratches easily. In this sense, you must act very carefully and delicately so as not to damage the sole. Therefore, it is strictly forbidden to use salt or soda for this type of cleaning. Therefore, it is preferable to gently remove the burn by applying white vinegar, in particular. This versatile stain remover is often recommended for removing limescale and limescale stains embedded in the iron. Therefore, it will be perfectly useful for relieving burns and making the Teflon sole of your device shine again.

How to do ? Here’s the step-by-step process:

1. Apply the white vinegar to a soft cloth or cotton ball. 2. Gently rub the burn until it is completely removed. 3. Then wipe the iron with a damp cloth.

One of the most popular ways to clean a burnt iron, which has a steel sole, is to apply table salt to it. In fact, if the sole is flaky, dirty and burned, salt (and even lemon!) is ideal for this cleaning. This will prevent the use of the famous iron filing sponges that risk damaging the sole by causing multiple scratches.

The method is very simple:

1. Place a piece of parchment paper on the sole. 2. Sprinkle generously with salt. 3. Then place the iron on high and slide it over the paper several times in different directions. Just shake off the excess salt and you’re done!

Result: without the slightest trace of dirt or burns, the sole shines again as before!