Does your iron produce limescale? It’s absolutely normal, other appliances also have this problem, but solving it is easy, just adopt the right solutions. Here’s how to descale your straightener in minutes!
It often happens that the iron hardly emits steam, or dirty steam that risks ruining the clothes. In these cases, it is clear that the limestone has been deposited in the tank and that it must be removed so as not to compromise the performance of the plank, which may eventually stop working.
Limestone, in fact, clogs the holes through which the steam comes out and when it comes out it forms whitish stains on clothing. If it’s dirty, the stains may even be yellow and even smell bad.
To remove limescale there are remedies that allow you to obtain excellent results in a few minutes. Let’s see what these remedies are, easy to perform and also economical!
Tips to prevent limescale from forming on your iron
To prevent limescale from forming on your iron, you can follow some valuable tips, which will help you deposit less. The first thing you should always do when ironing is to use only demineralized water.
Another tip is to use products that help dissolve limescale if the iron is embedded or dirty. There are suitable products on the market, but you have to be careful with those that are too aggressive.
Alternatively, you can use grandma’s remedies, always effective and very inexpensive, which allow you to free the iron in a few minutes. Here are some effective remedies to remove limescale from boiler and iron plate, perfect for making it work perfectly!
Solutions for cleaning the iron sole
The plate is the first element of the plate to undergo periodic maintenance. There are two ways to keep it clean and shiny, with vinegar and with baking soda. Here’s how to clean with vinegar:
- Pour a tablespoon of vinegar into a bowl of warm water.
- Mix the solution well and rub it onto the steel plate.
- Use a soft cotton or microfiber cloth
Also clean the outer walls of the iron with the same solution. Here’s how to use baking soda instead:
- Put some baking soda in a bowl of water.
- Mix and rub the mixture over the area to be treated
The iron sole will be clean and shiny and free of incrustations.
Water and vinegar to remove the iron
One way to remove limescale from the iron in a few minutes is to use water and white wine vinegar. It is an effective solution to remove limescale from the tank in just a few minutes and is useful for the iron to work perfectly. Here’s how:
- Fill the tank with water and white wine vinegar, putting them in the same amount
- Turn on the iron and adjust the maximum temperature
- Dispense the liquid as steam, leaving some in the tank
- After half an hour empty the tank
When the tank is emptied, the limescale residues that have been deposited at the bottom of the container will also leave, which will leave very easily as they have dissolved.
Removing limescale from modern planks
On new-generation plates, cleaning the plate is done differently and does not require the use of external products. In fact, being equipped with new and sophisticated technologies, modern sheets can reduce limescale formation.
In addition, they automatically initiate cleaning cycles that prevent limescale deposits from being deposited. Obviously these irons have a higher cost, so if you can’t buy them and you have a normal but efficient iron, you can use the above solutions to quickly solve the limestone problem!