Limescale and various incrustations dirty the shower glass. Here’s how to melt it all using just a few ingredients. For a great result you will find an infallible solution with talcum powder and vinegar. Seeing is believing!

The bathroom is one of the rooms that, more than the others, is essential to keep clean. Hygiene is essential because a proliferation of germs and bacteria is not hygienic at all, on the contrary, it is completely harmful to the health of the room itself and the air of the whole house.
One of the most difficult surfaces to keep clean and clear inside the bathroom is the wall and glass of the shower, which is usually the scene of accumulations of limescale, mold and various halos that damage both the aesthetics and the surface itself; the blame is mainly due to continuous showers, the water that splashes insistently and the soap residue that is deposited on it. dirtying the very and very encrusted windows so that they are not easily cleaned even with the most specific products on the market.

To easily remove limescale from the shower glass and its walls, it is necessary to use a product that has absolutely nothing chemical but that with its simplicity will make the surfaces shine dissolving any lime residue and everything will look good.
Of course, we are all aware of the existence of chemical products that are suitable for dissolving and removing scales, but they are often expensive and very polluting; for these reasons we can always resort to more ecological methods obtaining the same results.

How to thoroughly clean shower glasses to free them from limescale

To clean and sanitize the shower glass effectively, you will need these ingredients:

• 400 ml of water;
• 3 teaspoons talcum powder;
• 400 ml of white wine vinegar;
• 1 spray bottle.

As you can see, these are readily available ingredients that you probably already have at home.
Vinegar and talcum powder together will have a super cleaning effect: vinegar because it will dissolve potential scale and talc because it will help polish and shine surfaces, making them slippery (so as not to build up scale over time).

To make your own DIY spray, you’ll need to insert all of the ingredients we’ve listed above into a spray bottle. First you will have to put water and talcum powder, then after shaking everything, add the vinegar and mix the solution again to amalgamate the components with each other; At this point proceed to spray on the surface: whether it is the glass of the shower or the tiled wall inside, its effect will be surprising.

Method.

Spray the area to be treated, insisting more on the most stubborn incrustations and leave the mixture on for at least 10 minutes.
Then use a good microfiber cloth to rub and remove the residue. The abrasive and softening action of the cloth combined with your spray will make everything shine.
It is important to choose the right cloth so that its cleaning power is effective but never too aggressive so as not to create streaks and damage the surface.

At this point you can rinse with plenty of water to remove the talcum powder residue and prevent them from drying out and forming more halos; it is important not to forget this last step, otherwise you will not complete the procedure correctly.
Otherwise it is child’s play and you will have a transparent glass that, in a very short time and with little effort, will be free of halos and limescale stains.

After treating the desired area, blot off the excess water, and you’re done! Just give it a try!