To prevent water leaks and ensure the hygiene of your bathroom, cleaning and maintaining the joints is essential. Shower, bathtub and sink seals help maintain waterproofing and combat moisture. Unfortunately, over time the seams can darken and show mold stains. In addition, re-greasing the bathroom can be an expensive and time-consuming process. To help you clean your bathroom’s silicone joints and remove mold, here’s a formidable trick.

Remaking the silicone gasket of a shower or sink can be a complex task if you are not used to DIY. Fortunately, a few tips can effectively remove dirt, mold, and debris that can damage seals. To give your bathroom a boost, here’s a method to clean a silicone seal and remove embedded black stains.

A tip for removing mold from a silicone gasket

Among the many household products that can be used in many ways, we find white vinegar. This chemical-free ingredient can clean dirty objects as well as bleach, disinfect and descale various surfaces. Ideal for brightening the bathroom or removing limescale, this natural product is great for removing mould that appears in the joints of the tiles of the bathtub or shower.

Vinegar can disinfect and clean various surfaces – Source: spm

To carry out a joint cleaning, you will need:

• 2 cups white vinegar
• 1/2 cup dishwashing liquid

Start by pouring the white vinegar into a bowl, then add the dishwashing liquid and mix everything until you get a homogeneous liquid. Then use a sponge to scrub and remove the mold stain.

White vinegar to remove mold residues – Source: spm

Leave on for 20 minutes and then use an old toothbrush to scrub more and remove all embedded debris.

Other tips for cleaning silicone joints

To clean silicone gaskets, remove dirt, and prevent mold growth, there are other eco-friendly ingredients you can use:

• Black soap

Liquid black soap – Source: spm

Black soap can make your bathroom shine and fight bad odors related to excess moisture. Pour some liquid black soap onto an old toothbrush and scrub vigorously the silicone seals to clean them.

Leave on for 15 minutes, then rinse with warm water and use a microfiber cloth to dry the joints.

• Baking soda

Baking soda has whitening and disinfecting properties and remains an indispensable product for cleaning. To clean your silicone joints, mix 3 tablespoons of baking soda with 3 tablespoons of white vinegar. Moisten an old toothbrush with this solution and gently scrub your joints.

Baking soda has many virtues – Source: spm

Leave on for 10 minutes before rinsing with warm water. Use a dry cloth to clean your joints.

• Clay stone

Clay stone is one of Grandma’s tips that promote eco-friendly and practical cleaning. To brighten your silicone joints, use a clay-soaked brush to scrub each joint. Leave the product on for ten minutes and then rinse with warm water. Using a dry sponge, remove excess moisture.