Who said rural creativity couldn’t compete with modern engineering? A farmer has taken home mechanics to the next level by transforming an ordinary bicycle into a functional motorcycle… using a chainsaw!
This project is not only a display of ingenuity, but also an example of how limited resources can lead to brilliant solutions. Here’s how he did it and how you could try it too.
How to turn a bike into a motorcycle
🚲 Materials Needed
- 1 standard bike (preferably robust)
- 1 gasoline chainsaw
- Metal brackets or strong clamps
- Screws, nuts, and basic tools (screwdriver, wrench, drill)
- Pulley or drive system (an additional bike chain can be used)
- Metal plate or bracket to attach the chainsaw to the frame
🛠 Step-by-Step Procedure
1. Preparing the Chainsaw
- Remove the blade from the chainsaw if necessary (only the engine will be used).
- Make sure that the engine is working properly and that the starter system is in good condition.
2. Design a mounting system
- Use a metal plate or welded structure to mount the chainsaw motor over the bike’s rear frame.
- Make sure it sits firmly and doesn’t interfere with pedaling (although pedaling will probably be disabled).
3. Power transmission
- Use a pulley or chain connected from the chainsaw motor shaft to the rear wheel.
- You can use the original gear of the bike or adapt a suitable sprocket.
4. Testing and Adjustments
- Secure all screws and test in a safe area.
- Verify that the transmission responds well and that there is no unnecessary friction.
⚠️ Tips & Safety
- Protection above all: Wear a helmet, gloves and goggles when testing.
- Avoid public roads: This modification is not legal in many countries for use on public roads.
- Ventilation: The gasoline engine generates gases. Use in open spaces.
- Fine adjustments: Check the alignment of the chain or pulley to avoid premature wear.
If you have any doubts about this great idea, watch the following video made by Inventor K: