When an electric kettle or kettle stops working, it’s common to think that it’s time to discard it. However, most of the time, the problem is related to a small internal component that can be easily repaired.
Failures usually happen due to overheating or prolonged use of low-quality materials in their manufacture. Here’s a quick and effective method to fix it.
How to fix an electric kettle
With this simple and safe method, you will be able to bring your electric kettle back to life in a short time, avoiding unnecessary expenses and reducing electronic waste. Let’s get to work!
Materials Needed
- Screwdriver (or any tool that allows the case to be opened)
- Small knife or similar tool
- Caution: Make sure the kettle is unplugged before starting the process.
Procedure
1. Open the back cover
- Identify the screws on the bottom of the teapot.
- Use a screwdriver to remove them and access the inside of the device. If you don’t have a screwdriver handy, a knife can be an alternative in emergencies.
2. Locate the thermostat
- Once the housing is opened, locate a small metal plate, which is the thermostat.
- This component often crashes due to overheating or poor manufacturing quality.
3. Take off the thermostat
- Carefully insert a knife or thin tool to peel off the stuck cap.
- Make gentle movements until the thermostat is released.
4. Test the appliance
- Before closing the casing again, plug in the kettle with caution.
- Check to see if the power light is activated and the appliance is working properly again.
5. Close the case again
- Once you confirm that everything is in order, put on the back cover and tighten the screws.
Additional Tips
- Preventing overheating: Always make sure that the kettle contains enough water before turning it on to prevent the thermostat from overheating and sticking.
- Regular maintenance: Clean and check the appliance periodically to make sure all components are in good condition.
- Avoid forced repairs: If you don’t feel confident handling appliances, consult a specialized technician.