Cleaning kitchen burners can be a tedious task, especially when accumulated dirt seems impossible to remove. However, there is a simple and effective method that facilitates this task, leaving the burners impeccable.
Below, we explain the procedure step by step, along with additional tips to achieve the best results.
Ingredients Needed
The technique presented is based on the use of common and accessible ingredients, such as citric acid, dry yeast, and toothpaste. These elements, when combined correctly, form a powerful solution capable of dissolving even the most stubborn stains on burners.
Acid solution:
- 1 liter of hot water
- Citric acid powder
- Large container
Cleaning paste:
- 1 tbsp of dry yeast
- 1 tbsp toothpaste
- 2 to 3 tbsp white vinegar
- 1 Sponge
Procedure
- Preparing the acid solution for soaking
- In a large bowl, mix 1 quart of hot water with a small packet of citric acid powder (usually available in supermarkets).
- Insert the burners into this solution and let them soak for at least 20-30 minutes.
- You’ll notice an effervescent reaction in the water, indicating that the acid is working to loosen the accumulated dirt.
- Prepare the cleaning paste
- Mix a tablespoon of dry yeast with a tablespoon of toothpaste. If you don’t have toothpaste, you can also use tooth powder.
- Slowly add 2-3 tablespoons of white vinegar to the mixture until you get a homogeneous paste with the consistency of liquid sour cream.
- Apply the paste on the burners
- Remove the burners from the soaking and pat them dry lightly with a cloth.
- Apply the cleaning paste to the surface of the burners, covering the dirtiest areas.
- Use a sponge with an abrasive side to rub the mixture in, making sure to work in circles to maximize cleanup.
- Rinse and dry
- After rubbing, rinse the burners with plenty of hot water to remove any debris from the mixture and any loose dirt.
- Dry them completely with a clean cloth before placing them back in the kitchen.
Additional tips:
- Cleaning frequency: It is advisable to perform this procedure every 2-3 weeks to avoid severe accumulations of grease and dirt.
- Prevention: Clean burners immediately after a spill to reduce the need for intensive cleanings in the future.
- Ventilation: Do this in a well-ventilated area, especially when using acidic products such as vinegar.
- Alternative for stubborn dirt: If some stains persist, repeat the soaking process or use an old toothbrush to work on difficult areas.
With this method, cleaning the burners will no longer be an impossible task. Natural and inexpensive ingredients like citric acid, yeast, and vinegar, combined with a little effort, are the key to bringing them back to their original shine.
Follow this procedure regularly and enjoy a clean and functional kitchen!