{"id":14815,"date":"2025-05-19T22:17:56","date_gmt":"2025-05-19T22:17:56","guid":{"rendered":"https:\/\/www.grandmothers-recipes.top\/?p=14815"},"modified":"2025-05-19T22:18:11","modified_gmt":"2025-05-19T22:18:11","slug":"the-neighbors-were-surprised-none-of-them-knew-this-function-of-the-tapa","status":"publish","type":"post","link":"https:\/\/www.grandmothers-recipes.top\/?p=14815","title":{"rendered":"The neighbors were surprised, none of them knew this function of the tapa."},"content":{"rendered":"\n\n\n\n\n
Sometimes, we need a quick fix to secure a door without spending money on a commercial lock.<\/p>\n\n\n\n
With a simple homemade trick, you can create an improvised lock using a plastic bottle and some elements that you surely have at home.<\/p>\n\n\n
\n<\/figure>\n<\/div>\n\n\n
It is an easy, effective and perfect technique for when you want to keep a door closed without the need to install anything permanent.<\/p>\n\n\n\n
Here’s how to make this ingenious homemade lock that surprised all the neighbors.<\/p>\n\n\n\n
Materials<\/strong><\/h2>\n\n\n\n
\n
1 plastic bottle with long spout<\/li>\n\n\n\n
1\u00a0cutter\u00a0or scissors<\/li>\n\n\n\n
1 nail and a heat source (can be a candle or lighter)<\/li>\n\n\n\n
1 sturdy thread (can be nylon thread or a tanza)<\/li>\n\n\n\n
1 hot air gun (or failing that, a powerful hair dryer)<\/li>\n\n\n\n
1 nail or screw in the wall or door frame<\/li>\n<\/ul>\n\n\n\n
Procedure<\/strong><\/h2>\n\n\n\n\n
Cut the bottle:<\/strong>\u00a0Using a box cutter or scissors, cut off the top of the bottle, including the spout and cap. It is important that the cut part is at least 5 cm from the base of the beak to ensure a good fit.<\/li>\n\n\n\n
Prepare the lid:<\/strong>\u00a0Heat a nail with a candle or lighter and use it to drill two holes in the bottle cap. These holes will serve to pass the thread that will help hold the lock.<\/li>\n\n\n\n
Thread through:<\/strong>\u00a0Cut a piece of sturdy yarn and thread it through the two holes in the lid. Make sure to tie a firm knot so that it doesn’t come loose with use.<\/li>\n\n\n\n
Place on the doorknob:<\/strong>\u00a0Insert the spout of the bottle into the door handle, making sure it fits snugly.<\/li>\n\n\n\n
Heat Tighten:<\/strong>\u00a0Use a heat gun or a powerful hair dryer to heat the plastic. This will cause the bottle to shrink and adhere well to the doorknob, creating a firm grip.<\/li>\n\n\n\n
Fasten with the thread:<\/strong>\u00a0Using the thread you threaded through the lid, tie it to a nail or screw attached to the wall or door frame. This will prevent the door from opening, functioning as a makeshift lock.<\/li>\n<\/ol>\n\n\n\n
Councils<\/strong><\/h3>\n\n\n\n
Use a sturdy bottle:<\/strong><\/p>\n\n\n\n
For best results, choose a hard plastic bottle, such as 500ml or 1 liter soda, as they will shrink better when heat is applied.<\/p>\n\n\n\n
Alternative without heat gun<\/strong><\/p>\n\n\n\n
If you don’t have a heat gun, you can use hot water to soften the plastic and then press it against the latch until it takes the desired shape.<\/p>\n\n\n\n
For different types of doors<\/strong><\/p>\n\n\n\n
This trick works best on lightweight doors, such as indoor doors or closets. For heavier doors, make sure the thread is securely fastened to a firm nail.<\/p>\n\n\n\n
With this simple homemade trick, you can improvise a door lock without spending money and using recycled materials.<\/p>\n\n\n\n
It is a practical solution, easy to make and very useful for those times when you need to secure a door quickly.<\/p>\n\n\n\n
![\"\"](\"https:\/\/habemusasado.com\/wp-content\/uploads\/2025\/03\/34523-1024x576.jpg\")
<\/figure>\n<\/div>\n\n\n